Reactivos e instrumentos para inmunología, biología celular y biología molecular.
 
> H-1152 (dihydrochloride) [871543-07-6]

H-1152 (dihydrochloride) [871543-07-6]

Imprimir Imprimir
Por favor conéctese

Referencia HY-15720A-10mg

embalaje : 10mg

Marca : MedChemExpress

Contact local distributor :


Teléfono : +1 850 650 7790

Descripciòn

H-1152 dihydrochloride is a membrane-permeable and selective ROCK inhibitor, with a Ki value of 1.6 nM, and an IC50 value of 12 nM for ROCK2.

IC50 & Target[1]

ROCKII

12 nM (IC50)

CaMKII

0.18 μM (IC50)

PKG

0.36 μM (IC50)

AuroraA

0.745 μM (IC50)

PKA

3.03 μM (IC50)

Src

3.06 μM (IC50)

PKC

5.68 μM (IC50)

Abl

7.77 μM (IC50)

MKK4

16.9 μM (IC50)

MLCK

28.3 μM (IC50)

EGFR

50 μM (IC50)

GSK3α

60.7 μM (IC50)

AMPK

100 μM (IC50)

P38α

100 μM (IC50)

In Vitro

H-1152 dihydrochloride is an inhibitor of Rho-kinase, with an IC50 of 12 nM for ROCK2. H-1152 (H-1152P) also shows less inhibitory activities against CaMKII, PKG, AuroraA, PKA, Src, PKC, MLCK, Abl, EGFR, MKK4, GSK3α, AMPK, and P38α, with IC50s of 0.180, 0.360, 0.745, 3.03, 3.06, 5.68, 28.3, 7.77, 50.0, 16.9, 60.7, 100, and 100 μM, respectively[1].
H-1152 potently inhibits Rho kinase, with a Ki of 1.6 nM, and slightly suppresses PKA, PKC and MLCK, with Kis of 0.63, 9.27, and 10.1 μM, respectively. H-1152 (0.1-10 μM) highly inhibits MARCKS phosphorylation, with an IC50 value of 2.5 μM in LPA-treated cells, but shows no such obvious effects in PDBu-treated cells[2].
H-1152 (0.5-10 μM) cuases no decreased neuronal survival. H-1152 (1, 5 or 10 μM) also exerts no alterations in the ratios of different neuronal morphologies. Furthermore, H-1152 (10 μM) increases neurite length in both BMP4 and LIF cultures[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

H-1152 dihydrochloride Related Antibodies

Solvente y solubilidad
In Vitro: 

H2O : 35.71 mg/mL (91.02 mM; Need ultrasonic)

DMSO : 10 mg/mL (25.49 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.5488 mL 12.7440 mL 25.4881 mL
5 mM 0.5098 mL 2.5488 mL 5.0976 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year (sealed storage, away from moisture). When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 1 mg/mL (2.55 mM); Clear solution

    This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 1 mg/mL (2.55 mM); Clear solution

    This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  PBS

    Solubility: 50 mg/mL (127.44 mM); Clear solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
Pureza y Documentación
Referencias

Usted podría estar interesado también en los siguientes productos:



Referencia
Descripción
Cond.
Precio Sin IVA