Defactinib (hydrochloride) [1073160-26-5]

Referencia HY-12289A-5mg

embalaje : 5mg

Marca : MedChemExpress

Contact local distributor :


Teléfono : +1 850 650 7790

Descripciòn

Defactinib hydrochloride (VS-6063 hydrochloride; PF 04554878 hydrochloride) is a novel FAK inhibitor, which inhibits FAK phosphorylation at the Tyr397 site in a time- and dose-dependent manner.

IC50 & Target

FAK[1]

In Vitro

Defactinib (VS-6063) inhibits FAK phosphorylation at the Tyr397 site in a time- and dose-dependent manner. RPPA data shows that Defactinib reduces levels of AKT and YB-1 in taxane-resistant cell lines. The expression of pFAK (Tyr397) is statistically significantly inhibited by Defactinib in a dose-dependent manner in all cell lines. Defactinib inhibits pFAK (Tyr397) expression within 3 hours, with a gradual return of expression by 48 hours[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Solvente y solubilidad
In Vitro: 

DMSO : 6.67 mg/mL (12.19 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

H2O : < 0.1 mg/mL (insoluble)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 1.8283 mL 9.1416 mL 18.2832 mL
5 mM 0.3657 mL 1.8283 mL 3.6566 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 0.67 mg/mL (1.22 mM); Clear solution

    This protocol yields a clear solution of ≥ 0.67 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (6.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 0.67 mg/mL (1.22 mM); Clear solution

    This protocol yields a clear solution of ≥ 0.67 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (6.7 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Pureza y Documentación
Referencias

Usted podría estar interesado también en los siguientes productos:



Referencia
Descripción
Cond.
Precio Sin IVA
HY-13805-5mg
 5mg 
HY-10459-5mg
 5mg 
HY-101053-5mg
 5mg