Reactivos e instrumentos para inmunología, biología celular y biología molecular.
 
> Dabigatran etexilate (mesylate) [872728-81-9]

Dabigatran etexilate (mesylate) [872728-81-9]

Imprimir Imprimir
Por favor conéctese

Referencia HY-10274A-100mg

embalaje : 100mg

Marca : MedChemExpress

Contact local distributor :


Teléfono : +1 850 650 7790

Descripciòn

Dabigatran etexilate mesylate (BIBR 1048MS) is an orally active proagent of Dabigatran (a direct inhibitor of thrombin). Dabigatran etexilate mesylate has anticoagulant effects and is used for the prophylaxis of venousthromboembolism and stroke due to atrial fibrillation[1].

In Vivo

Dabigatran etexilate mesylate (BIBR 1048MS; oral; 10, 20 and 50 mg/kg for rats and 1, 2.5 and 5 mg/kg for monkeys) has dose- and time-dependent anticoagulant effects and has maximum effects between 30 and 120 min after administration, respectively[1].
Dabigatran etexilate mesylate maximally and significantly prolongs partial thromboplastin time (aPTT) to 25.2, 38.4 and 78.3 s in 30 min after 10, 20 and 50 mg/kg oral doses, respectively[1].
Dabigatran etexilate mesylate maximally prolongs the aPTT to 34.3 s, 44.0 s, and 63.0 s, respectively, 2h after 1, 2.5 or 5 mg/kg doses in the monkey[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: Male rats (280-350 g) and rhesus monkeys of either sex (3-8 kg)[1]
Dosage: 10, 20 and 50 mg/kg for rats and 1, 2.5 and 5 mg/kg for monkeys
Administration: Oral
Result: Had dose- and time-dependent anticoagulant effects.
Ensayo clínico
Peso molecular

723.84

Fòrmula

C35H45N7O8S
No. CAS
Appearance

Solid

Color

White to yellow

SMILES

O=C(N(C1=NC=CC=C1)CCC(OCC)=O)C2=CC=C3C(N=C(N3C)CNC4=CC=C(C(NC(OCCCCCC)=O)=N)C=C4)=C2.CS(=O)(O)=O
Envío

Room temperature in continental US; may vary elsewhere.
Almacenamiento

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

Solvente y solubilidad
In Vitro: 

DMSO : 25 mg/mL (34.54 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 1.3815 mL 6.9076 mL 13.8152 mL
5 mM 0.2763 mL 1.3815 mL 2.7630 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (3.45 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (3.45 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Pureza y Documentación
Referencias

Usted podría estar interesado también en los siguientes productos:



Referencia
Descripción
Cond.
Precio Sin IVA
HY-B0247-100mg
Torsemide [56211-40-6]
 100mg 
HY-17380-100mg
(S)-Timolol (maleate) [26921-17-5]
 100mg