Reagents and instruments for immunology, cell biology and molecular biology.
 
> MRT67307 [1190378-57-4]

MRT67307 [1190378-57-4]

Print Print
Please log in

Cat# HY-13018-10mg

Size : 10mg

Brand : MedChemExpress

Contact local distributor :


Phone : +1 850 650 7790

Description

MRT67307 is a dual inhibitor of the IKKε and TBK-1 with IC50s of 160 and 19 nM, respectively[1]. MRT67307 also inhibits ULK1 and ULK2 with IC50s of 45 and 38 nM, respectively. MRT67307 also blocks autophagy in cells[2].

IC50 & Target[1][2]

TBK1

19 nM (IC50, at 0.1 mM ATP)

IKKε

160 nM (IC50, at 0.1 mM ATP)

ULK2

38 nM (IC50)

ULK1

45 nM (IC50)

Autophagy

 

In Vitro

MRT67307 inhibits IKK and TBK1 with IC50 values of 160 and 19 nM when assayed at 0.1 mM ATP in vitro, but did not inhibit IKKα or IKKβ even at 10 μM[1].
MRT67307 (2 μM) prevents the phosphorylation of IRF3 in bone-marrow-derived macrophages (BMDMs). MRT67307 (2 μM) dose not suppresse the activation of JNK or p38 MAPK by poly(I:C)[1].
MRT67307 (1 nM-10 μM) prevents the production of IFNβ in macrophages[1].
MRT67307 (10 μM) is sufficient to reduce phospho-ATG13 to control levels[2].
MRT67307 (10 μM) blocks autophagy in mouse embryonic fibroblasts (MEFs)[2].
MRT67307 (5 μM; 4 h) abrogates TBK1/IKKε-induced CYLD phosphorylation in 293T cells[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

MRT67307 Related Antibodies

Western Blot Analysis[3]

Cell Line: 293T cells
Concentration: 5 µM
Incubation Time: 4 hours
Result: Abrogated TBK1/IKKε-induced CYLD phosphorylation.
Molecular Weight

464.60

Formula

C26H36N6O2
CAS No.
Appearance

Solid

Color

Off-white to light yellow

SMILES

O=C(NCCCNC1=NC(NC2=CC=CC(CN3CCOCC3)=C2)=NC=C1C4CC4)C5CCC5
Shipping

Room temperature in continental US; may vary elsewhere.
Storage
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
Solvent & Solubility
In Vitro: 

DMSO : 100 mg/mL (215.24 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.1524 mL 10.7619 mL 21.5239 mL
5 mM 0.4305 mL 2.1524 mL 4.3048 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (5.38 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.5 mg/mL (5.38 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.
Purity & Documentation
References

You might also be interested by the following products:



Cat#
Description
Cond.
Price Bef. VAT
NB-64-02286-500ug
Dihydrocytochalasin B [39156-67-7]
 500ug 
NB-64-00236-10mg
MRT67307 [1190378-57-4]
 10mg